Are Chainsaw Bars Interchangeable?

Share on facebook
Share on google
Share on twitter
Share on linkedin

Are chainsaw bars interchangeable? Unfortunately, it is impossible to give an answer that is correct for all types of chainsaws. Whether or not the chainsaw bars are going to be interchangeable actually depends on a lot of different factors, not the least of which includes the particular make and model of chainsaw that you have. For the most part, you can assume that you probably will not be able to take a name brand chainsaw and use a bar from another name brand chainsaw on it. With that being said, you just might be able to use what you might consider a universal chainsaw bar, meaning that you may be able to find one that fits your particular chainsaw that isn’t a name brand related to a competitor. Even if you are able to do that, there are still some other things that you have to look at in order to know whether or not the bars are going to be interchangeable.

Things to Consider

Obviously, the first thing you have to look at is the size of the bar itself. If you are going to use the same bar for two different chainsaws, they have to be the same size. You should be able to gauge this visually for the most part, but eventually you’re going to have to measure the bar itself in both length and width in order to determine whether or not it is even feasible to look at any of the other components that are involved. If you find that the measurements do not match up, you are not going to be able to use that bar on that particular chainsaw. If they do match up, there are still some other things that need to be examined before you will know for sure whether or not you can use the bar interchangeably.

Your chainsaw has a tensioner hole that allows you to adjust the tension of the chain on the bar, as well as a bolt slot that attaches the bar to the chainsaw. There are also oil holes that allow you to oil the chain. On some models, the chainsaw is designed to automatically oil the chain but this is not the case for every model so it is important to know which category your particular chainsaw falls under. At any rate, all of these things must be identical on both chainsaws in order for you to use the bar on either one. Therefore, if the tensioner hole does not line up or if the bolt slot is not in the same place on both machines, it simply won’t work. The same is true for the oil holes so you have to know exactly how each machine is designed and how it operates in order to pull this off.

If you find all of these things match, your next step is to remove the bar from one chainsaw and place it on the other machine. Once you have ensured that everything is inspected and is in proper working order, take the chainsaw out and give it a try. See how well it actually works. If you don’t have any problems, then you know that you can use that same bar for both of the machines that you have without a problem. This will give you additional options when you are working around your property and you need to use a chainsaw because you have the option of using more than one machine in order to get the job done.

Leave a Reply

Your email address will not be published. Required fields are marked *